WEP 882D Soldering Iron Station 2-IN-1 SMD Scorching Air Rework Station with 2 Spools of Solder Wire, 5 Soldering Ideas, 3 Scorching Air Nozzles, Brass Wool Tip Cleaner, Tweezers, Desoldering pump
$59.99
Value: $59.99
(as of Mar 15, 2025 23:47:57 UTC – Particulars)
Product Description
2-IN-1
WEP 882D Integrates a soldering station with scorching air rework station, making a compact fundamental unit. This unit is a good addition on your software package in case you’re on the lookout for a multifunctional soldering and rework station that has minimal footprint in your work desk.
Software
Common Soldering / RC Builds / DIY Circuits…
Soldering Iron
Powered by top quality ceramic heating ingredient to supply constant heating efficiency, and nice reliability. Supplies higher ergonomics than conventional soldering iron.
Soldering Station
Temperature: 392-896°F
PID Temperature Management: Sure
Sleep Mode: Sure
Scorching Air Gun
Constructed with patented cylindrical ceramic heating ingredient design, offering superior temperature management and security as in comparison with conventional coiled heating ingredient. Constructed with spiraling outlet design to supply concentrated air movement throughout SMD rework.
Scorching Air Rework Station
Temperature: 212-896°F
Adjustable Air Quantity: Knob-control
PID Temperature Management: Sure
Standby Mode: Sure
Sleep Mode
Prompts when non-use for longer than 10 minutes is detected, cooling the soldering iron’s temperature to 392°F. This mode protects the soldering tip’s plating from oxidizing when left unused for 10 minutes, and extends the ceramic heating ingredient’s lifespan.
Automated Shutdown
Solely prompts below sleep mode (10-minute) when additional non-use for longer than 20 minutes is detected. This prevents the person from leaving the station turned on unattended, offers higher security when customers unintentionally overlook to show off the station.
Standby Mode
When the new air gun is positioned into the holder, regardless the temperature setting, the new air gun will routinely cease heating, and funky to 212°F. As soon as the new air gun is cooled, the blower will even cease working to enter the standby mode. This operate extends the new air gun’s heating ingredient lifespan.
WEP 882D Equipment Included
5 x Soldering Ideas + 3 x Scorching Air Nozzles
2 x Spools of Solder Wire
1 x Tip Cleaner (Brass Wool)
1 x Desoldering Pump
1 x Tweezers
Specs
Mannequin quantity WEP 882D Rated voltage vary 110V-127V/AC, 60Hz Rated energy 750W Primary unit dimensions L5.9*W3.54*H2.28in±0.2in Working ambient temperature 0~40°C/32°F~104°F Show LED Nixie Tube Soldering iron Temp. vary 200°C~480°C/392°F~896°F Iron Tip to floor resistance ＜2ohms Scorching Air Station Temp. vary 100°C~480°C/212°F~896°F Air Supply Brushless fan with clean air supply Air Quantity ≤120L/min
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Buyer Evaluations
3.8 out of 5 stars 11
4.7 out of 5 stars 5
—
3.8 out of 5 stars 55
4.3 out of 5 stars 66
4.5 out of 5 stars 209
Value
$10.99$10.99 $19.99$19.99 $10.99$10.99 $134.89$134.89 $89.99$89.99 $69.99$69.99
Class
Soldering Iron Ideas Set Soldering Iron Handpiece Scorching Air Gun Nozzles set 2-IN-1 Multi Station 2-IN-1 Multi Station 2-IN-1 Multi Station
Capabilities
ONLY appropriate with WEP 926LED V3, WEP 8786D-I SE, WEP 882D, WEP 948DQ-II Appropriate with WEP 948DQ-II, WEP 882D, WEP 8786D-I SE Appropriate with all WEP scorching air rework stations EXCEPT WEP 959D Soldering & Desoldering Scorching Air Rework & Soldering Scorching Air Rework & Soldering
Temp.Vary
no information
no information
no information
392~896℉ 392~896℉ 392~896℉
Different Parameters
no information
no information
no information
Desoldering Temp.Vary: 716~896℉ Scorching Air Temp.Vary: 212~896℉ Scorching Air Temp.Vary: 212~896℉
PID Temperature Stabilization
no information
no information
no information
✓
✓
✓
Temparature Calibration
no information
no information
no information
✓
✓
✓
Standby/Sleep Mode
no information
no information
no information
✓
✓
✓
2-IN-1: This 2-IN-1 rework station combines a soldering station with a scorching air rework station in an excellent compact physique. Comes with particular person LED shows, energy switches, temperature management buttons, and air quantity adjustment.
Precision Temperature Management: This rework station comes with built-in PID program, offering temperature management for each the soldering iron and scorching air gun. The soldering station temperature is 392-896°F adjustable, and scorching air rework station temperature is 212-896°F adjustable with variable air quantity.
Helpful Capabilities: This unit comes with sleep mode for soldering iron, standby mode for decent air gun, °C-°F Conversion, automated shutdown, and calibration operate. You should use these features to scale back put on, prolong soldering ideas and heating ingredient’s lifespan, and obtain better temperature precision.
Full Soldering Equipment: This soldering package for electronics rework consists of 2 spools of solder wire, 5 soldering ideas (I/B/Okay/3.2D/3C), brass wool tip cleaner, desoldering pump, 1 pairs of tweezers, 3 scorching air nozzles. You may get began with soldering with every thing on this package.
This soldering iron package is roofed by our unique 1-year USA technical help, with 24-hour help from our devoted workforce. Notice: This product is rated for 110-127V USA specs. Don’t join this iron to a 220V energy socket.
Prospects say
Prospects discover the soldering station straightforward to make use of and a superb worth for cash. They recognize its accuracy and sleep mode. Nevertheless, some have combined opinions on the construct high quality and compactness.
4 reviews for WEP 882D Soldering Iron Station 2-IN-1 SMD Scorching Air Rework Station with 2 Spools of Solder Wire, 5 Soldering Ideas, 3 Scorching Air Nozzles, Brass Wool Tip Cleaner, Tweezers, Desoldering pump
Add a review
Related Products
![LISEN Retractable Automobile Charger [69W USB C Car Charger Adapter] for iPhone 16 Automobile Charger Quick Charging, Journey Important Presents for Girls Males, Automobile Equipment USBC Automobile Charger for iPhone 16 15 14, Grey](https://i2.wp.com/m.media-amazon.com/images/I/71R6ka8Os4L._AC_SL1500_.jpg?w=300&resize=300,300&ssl=1)
$59.99
book reader –
Unconventional use
As usual I fond myself someplace where I did not have access to the soldering stations I already have. I needed to do a repair on a truck sensor plug. The soldering station worked to solder two 18 gauge copper wires so nothing special or unusual other than I thought that I had to increase the temperature a little to get the job done more so than what I would have done on my other soldering stations. It did work.What I found exceptional was the hot air rework feature. It comes with several nozzles of different sizes and the speed of the fan can be varied. That feature was GREAT for heating the shrink rap tubing that I put on to cover the bare wires. For me that feature and convenience was worth the price of the station. The biggest problem with shrink rap tubing is heating it so that it will shrink without damaging or burning up the wires in the surrounding area. Most heat guns supply too much hot air or too hot of air that effects the surrounding area in a negative way. The old standby the BIC lighter is hard to control evenly with out again damaging the surrounding wires,area.Construction is not great but it is serviceable if not abused. As far as temp control I have no idea as I do not have an accurate way to check temp or variations. The hot air has a turn on / shut off feature that when the cradle it is off and when you remove the hot air wand it turns on. Magnetic switch would be my guess. It does work well and is handy although when it gets hot you have to be careful putting the wand in the cradle.Would I purchase another one? I do not know yet it depends on how long this one lasts especially the hot air rework feature which I would still use even if the soldering iron quit.
Andrew Wakefield –
Great for soldering PCBs
I have had this unit since Christmas, but hadn’t been able to put it to use until the past few weeks. This unit has been everything I had hoped for and more – frankly, it has exceeded my expectations!The unit is compact enough to keep on my desk, and it is convenient to use – easy to adjust temperature, clear readouts, easy to switch from the hot air to the iron and vice-versa.This is my first experience with a hot-air unit, and I am so glad I got it – so convenient for SMD work. I have found it equally effective for initial soldering of SMD components (using solder paste) and for re-work. On the prototype board I have been working on, I have been experimenting with different resistor and capacitor values, and must have soldered, de-soldered, swapped out, and re-soldered some of the components at least a dozen times, with no problems.I can’t (yet) comment on the longevity of the unit, but thus far it has worked flawlessly. It feels like it is well built; switches and knobs work smoothly.I’m impressed! Highly recommended.
CA Guy –
Amazing value, everything you need to get started soldering with SMD components
I’d been using my simple trusty Weller soldering iron for the last 50 years. I’d been enticed by the new temperature controlled models but never wanted to pay the price.Recently I was considering whether it was feasible to use SMD components for a hobby project. I’d never done hot air soldering but after seeing a demo video I was hooked on the idea. Seeing all 16 pins heat up simultaneously and the IC be literally sucked into place on the PCB pads due to surface tension!!! Wow, that was the holy grail to this old guy used to hand wiring things.This soldering and hot air station is an astonishing value. The soldering iron heats up so much faster and then levels off at your chosen temperature. I can get to work faster and the digital display confirms the current temp. No more waiting around blindly wondering when the old Weller would finally get there.This is the first hot air station I’ve ever used, so frankly I can’t compare it to others. But I can say that it works well and it was very easy for me to assemble the first board I designed using SMD components. The main trick seems to be consistently getting just the right amount of solder paste on the PCB pads.I’ve attached pictures of the old 8 bit hand wired design and the new 40 bit PCB I designed using SMD components and assembled using this hot air station. Who’da guessed it could actually be so easy to do that at home without special equipment other than this very low cost hot air station. I’m amazed! It almost feels like I can paint solder onto the pads with the hot air brush in my hand. I shoulda bought one a long time ago.
Alwaysmiddle –
Only complaint is that gun and air blower doesn’t seem to turn off once you heat them up, the dial is not reliable after you start the gun. You can still kill the power, but it’s not intuitive.