Syncwire Magnetic Automotive Telephone Holder for Dashboard, Cell Telephone Automotive Kits, 360° Adjustable Magnet Cell Telephone Mount Appropriate with iPhone, Samsung, LG, GPS, Mini Pill and Extra

The only review you need to read for this item
Perfect *** IF *** and only ifYou apply it to a Perfectly Smooth SurfaceThe swivel joint is rock solid tight, yet Smooth as silk. No plastic at all as almost all others are, only machined metal alloys, within a minimalist design. An Excellently Engineered Device when used within specifications.Magnetics are impressively strong and do the job very well … remember it is NOT Welded steel to steel or even super glue…it is ONLY a very strong Magnetic connected to a very THIN piece of steel and as such WILL fall off if you bump into it or drive FAST on a dirt road however 99% of normal driving will be PERFECTNote: Adjust the proper angle 98% BEFORE you apply the adhesive as it is a ONE time requirement and can *POSSIBLY* (?) rip it off the dashboard through leverage.I attached it to the LCD Display for the radio as it is only half an inch round at the base and when placed in a corner barely covers anything.There are a hundred different designs available but as with many things …Less is more and in my opinion, this is as close to perfect as around ten bucks will ever get you for a personal car using Waze.PS I have a giant heavy phone in an almost thick protective case with a kickstand and it still performs nearly flawlessly every day.There is however one use case that it is not suited for which is ☆IF☆ you have a pop up between two fingers handle which is *** N O T *** centered on the back as it will cause the phone to be out of balance in the horizontal position and will most likely Fall Off …. okay this horse is dead, just buy it.

Minimalism at its Best! This thing works
After trying several other (dashboard-type) devices to hold my phone, I finally found one I love! Bean bag holders are too intrusive to my line of sight and kept sliding off. Suction cup holders simply wouldn’t stick to my car’s curved dash. Another that I bought had an optional clip-on mount that attached to the A/C vent… again, it kept falling off, even after I applied a small layer of cushiony plastic tape to the grip clip — plus it interfered with the air flow of air conditioning while driving.BOTTOM LINE: This little thing is awesome. It grips your dash, and the magnet grips your phone. It’s like magic (And NO, I’m not being paid for this review.) Plus, when not using it, it’s so small that you don’t even notice it’s there.IF YOU BUY – One caveat… Be sure to mark the exact placement of where you want the mount on your dash before you peel off the protective layer and stick it on. Same goes for the thin magnetic piece that goes on the back of your phone – or phone cover/case. You’ll want to sit in the driver’s seat and play around with it for a bit. You may even want to mark the spot on your dash (and the back of your phone) with some painters tape or something to make sure you get it right. I messed up on the first try, but fortunately, this product came with extra sticky pads. So I was able to remove the dash mount and, with the extra pad, place it in the correct spot for my car.Note that there are also two magnetic pads that attach to back of your phone; one is round and the other is a rectangular shape. I actually used both on my phone…placement of one is when I want my phone horizontal for GPS navigation and the other is more centered for when I want to stick my phone on the dash vertically. Sorry for this long review… but lastly, the magnetic pad(s) that attach to back of your device are super thin. In other words, they don’t interfere in any way of everyday handling & using my phone.Kudos to whomever designed this thing

Works great, holds my phone without drooping.
I’ve had a couple different Chinese-made phone mounts before and the issue I had with those were that they relied on an adjustable plastic collar to lock the mount’s swivel head in position. The problem with those designs is that they become loose very easily and the phone tends to droop. They also have square bases as opposed to round which means care must be taken during install to ensure it’s level.I have neither of those issues with this mount. Despite having no adjustment collar it holds my phone securely. I also quite like that the head can be twisted and the base is round meaning you don’t have to worry about lining up logos or ensuring that it’s mounted level. The magnetism is also quite strong. I adhered the metal plate to the back of my phone case and I have not had the phone fall off a single time.This is definitely a cut above the rest. One small thing worth mentioning is that it’s rather small. It does not protrude much from the surface your mounting from. This is not at all a problem for me, but its small size may not be ideal for your application.

Works perfectly and the magnet is very strong , hold my samsung s22+ in place without any trouble at all . The 3M tape is very good too , Had no trouble installing it and looks really good. Low price but good quality

Excellent

Załączone w produkcie blachy zrobione chyba z aluminium przez co zjawisko magnetyzmu nie działa.