Cellphone Mount for Automobile Cellphone Holder Mount Cell Cellphone Holder Automobile Common Cellphone Stand for Automobile Dashboard Windshield Cell Cellphone Car Cradles Match iPhone Android

Works well
Have had this mount for 2 weeks now and it works quite well. It seems well built and it seems it’d last.I installed it on the windshield. It also comes with a “sticker”/base for dashboard mount but my dashboard is curved so I didn’t try it (suction won’t work as well on a curved surface). I cleaned the windshield area first with rubbing alcohol just in case.The suction cup has adhesive on the perimeter so it attaches really well. It’s hard to then remove but is doable – I moved it twice (first time because I decided to go from horizontal to vertical orientation, and second to leave more space for the charging cable).It’s fairly stable while driving and there is very minimal shaking (at least on paved roads, didn’t try dirt or gravel). There is a ball joint on the back with nut to adjust the tension. It was easy to tighten it just right so I can adjust the tilt by hand without it being too loose and sagging by itself.The angle of the arm attaching to the suction cup can be adjusted to several positions – they “click”/ratchet and can be tightened with a knob. That probably had to have several fixed positions so it won’t sag, but it limits a bit possible positions. So I picked what I liked first and tightened it before installation to be sure it can sit just right.The telescoping arm can be extended several inches and there is another knob to tighten it – that works as expected.There is a “lip” on the bottom that holds the phone, and that can be pushed down by half an inch or so. Extend it fully before mounting (I first didn’t do that and had to reposition); then you push it up if you need space for the charging cable. The “lip” has opening in the middle for charging cable (that’s where my Android charges but don’t know other devices).The phone locks with the two side “wings” which can be pressed/closed by hand. There is a button on the back to release them. That works well, the phone is held securely when driving, and is easy to remove.Overall quite nice and better than I expected.

Easy to install and works great.
This phone holder is very easy to install on your car windshield, and the suction is very powerful–there’s no way this thing is falling off! The arm swivels and it’s easy to adjust, which is great if you’re using your phone for GPS or your passenger is your navigator, so you need to turn it around. Also, once adjusted, you can lock the arm in place, so it won’t move around while you’re driving. I like that there’s a dashboard mounting option too, but I haven’t tried that. I would recommend this as an affordable product that securely holds your phone while you’re driving.

Good quality
Works well phone hold very good safety

Best phone mount out here!
This has to be the best phone mount around! You cannot beat the price for the quality of the mount. I have had this mounted in my tractor for months. Every now and then I remove it to clean it with warm water and let it dry to keep the suction working great.If you are a truck driver, this will work great for you. You can extend the mount and the phone holder has a variable length & width to adjust to your phone size.

Fell off very quickly when I was driving and it won’t reseal.