Automobile Rear Bumper Protector Guard, American Flag Anti-Scratch Door Entry Sill Guard, Non-Slip Rubber Car Trim Cowl Safety Strip, Automobile Equipment for Most Vehicles (Pink Edge/Black Flag/40.9″x3.5″)
Original price was: $9.99.$8.99Current price is: $8.99.
Worth: $9.99 - $8.99
(as of Mar 24, 2025 04:10:35 UTC – Particulars)
Product Description
Why set up a protecting bar
3D stereo texture Non -slip, higher scratch – resistant safety automotive love automotive
Tremendous toughness PVC materials could be arbitrarily bent and higher match the physique
Thickened design Not afraid of scratching the automotive, the longer use time
You’ll be able to clearly see the comparability earlier than and after the set up of the protecting sticker. Putting in our protecting stickers can present good safety in your automotive, stop it from being scratched and soiled, and make your automotive look extra lovely.
Clear the floor of set up place,to make sure that it is no oil, grease and wax and so forth.
Tear off the 3M tape on the again of rear bumper protector from the perimeters.
Stick on correct place and gently press throughout the guard to make sure good adhesion.
Protects your automotive from scratches when loading or unloading.
【Nice Materials】: This automotive rear bumper protector guard is made of top quality PVC tender rubber; The striped and grooved design of the floor provides its slip resistance; On the identical time, it seems very fashionable; It’s premium and sturdy, bends simply, and doesn’t fade or break; It protects your automotive from scratches and in addition stop issues from falling once you put it in or out of your baggage
【American Flag Design】: This door entry sill guard designed with American flag within the center, seems nice on the bumper and was pretty straightforward to put in; The colours are primarily black and pink, it would add a cool look to your car and make your car look so a lot better; It protects the highest of the rear bumper towards scratches and makes an enormous distinction in comparison with different autos
【Full Safety and Multi Perform】: This bumper safety strip can successfully shield the rear bumper of the automotive from scratches when loading and unloading baggage, scale back exterior impression, and may also cowl the broken elements of the automotive, making your automotive look model new; Along with that, it is a handsome trim that provides a trendy look to your automotive
【Full Safety and Multi Perform】: This bumper safety strip can successfully shield the rear bumper of the automotive from scratches when loading and unloading baggage, scale back exterior impression, and may also cowl the broken elements of the automotive, making your automotive look model new; Along with that, it is a handsome trim that provides a trendy look to your automotive
Clients say
Clients discover the product useful and sturdy. They discover it straightforward to put in and admire its good high quality rubber and thickness. Many are glad with its look and bumper safety. Nonetheless, some clients have points with the adhesive high quality – it would not treatment correctly, bubbles up, or would not keep on the rubber effectively after making use of. There are combined opinions on the match and worth for cash.
13 reviews for Automobile Rear Bumper Protector Guard, American Flag Anti-Scratch Door Entry Sill Guard, Non-Slip Rubber Car Trim Cowl Safety Strip, Automobile Equipment for Most Vehicles (Pink Edge/Black Flag/40.9″x3.5″)
Add a review
Related Products
Original price was: $9.99.$8.99Current price is: $8.99.
Kindle Customer –
Honda HRV 2022 Hard Cargo Cover
Fits perfectly in 2022 Honda HRV Sport. Very EZ to install and Very EZ to remove when larger items need to be loaded. Some folks have said that there’s a gap between the rear seat backs — easiest solution is to recline the rear seats. Even without reclining the gap does not allow cargo underneath to be visible from outside the vehicle. Very happy with quality, price and fit/finish. Only thing that would make it better would be if it were hinged such that it would pivot upwards as the tailgate is opened. Seems like a simple pivot point on each side would be possible – not the contraption that requires disassembly and drilling many holes that the Honda cover requires – at a significantly higher price. Happy Happy Honda Owner.
Gator Jeff –
Installs easily with a little prep, easy to cut to fit.
Installs easily with a little prep, easy to cut to fit. I bought the wider size since it was only a little more expensive and gives more-complete protection for the full depth (front to back) of the bumper. I’ve had model-specific protectors in the past, 1 of the clear plastic style, 1 of a rough black plastic (almost like sand paper) style, & believe this thick rubbery style offers better protection at a much better price.I read enough reviews commenting that the cover wouldn’t lie flat due to being shipped as folded rather than rolled or flat, so I took measures to fix that. First, I rolled it out flat inside the house to relax g6ir a couple days. Then, I placed it on my dashboard while driving around for a few errands to get it nicely warmed up. Then I rolled it up, tape-side facing out (still with tape-protector of course) & stuck it in a cup holder. I then rolled it out as I prepped the clean bumper with alcohol & a rag. Since this universal cover was too wide for my 2017 Fit, I had to trim both ends using heavy-duty scissors/shears. I used a paint can to trace a nice curve on each end so that it fits the contours of the bumper. My wife helped me so that there were enough hands to expose the tape & stick down the cover while maintaining the right position. We marked both the middle of the bumper & of the cover and worked our way towards 1 side and then the other. It’s been a few weeks, including some rainstorms, and so far so good. Very pleased.
Cynthia Zwick –
Bubbled and wrinkled????
Very dissapointing as the product was all bubbled and wrinkled. The red backing was all wrinkly, but I thought it was just loosened in several places, When I removed the backing I was stunned to see that the backing was not loose, but tight to a bubbly, wrinkled back of the strip. I used a block to press it down flat and anchor the valleys, but the wrinkles are still visible.I also was disappointed in that this product does not fit my car perfectly. There is a central depression in the deck top that this cover does not accomodate well and will not conform exactly too. I wound up cutting it in half and attached two short parts with a gap over the depression.Very dissappointed over all and would not recommend this product on the basis of quality and fit. Look elsewhere for one tht fits and accomodates surfaces that are not flush then entire length.
Doug Murry –
Top of rear bumper protector
The one I received is thick rubber. Very sturdy feel. Adhesive backing material is strong stuff. Color of inlay area is vivid and detailed nicely, clean clear edges.Very satisfied with the product.
Yezani –
Gets the job done !
I have a 2020 Chevy Trax and my first day with my car my dog was super excited to see his new trunk area and scratched the bumper area getting in (he usually doesn’t but clearly first day with a new car was the exception) he is a service animal and travels everywhere with me so figured for such a good price I’d give it a shot!! It looks good, fits perfectly and I cleaned and dried the area before sticking it was easy and simple and so far has withstanded the car wash, rain and regular driving . Looks like apart of the car I’m pretty pleased over all
Sscake –
Horrible sticker, but thick rubber design
Sticker just bubbled and peeled right off. Didn’t stick at all. Bought some epoxy and glued it. A bit short than expected, since it is rubber it does have a stretch, but not much. Horrible design for stickiness but rubber I thick quality, had to spend $10 more otherwise would’ve given 5stars. I give about 2.5.
Linda Estrada –
Perfect for what we needed!
I backed into “something” and it pinched my bumper and dented my trunk lid. After it was pulled out a bit it left a crack that we’re not ready to fix yet. My husband thought one of these would cover it nicely and it did! We aren’t stepping on it so I can’t speak to the durability when using it that way. It does look great! It is a straight piece but after it being warmed slightly (winter application which I don’t recommend unless u can warm it) it got the folded marks (from packaging) out and was easier to manipulate to make a slight curve so it would… curve to the shape of our bumper. The thickness was almost too much to close our trunk since we have it tight on the bumper. But it closed! I highly recommend! Great value!
Wayne Davis –
Nice thick product
This is made from a nice thicker rubber than expected. I find heating it before placing it on the car will eliminate all bumps from shipping. The adhesive Seems to securely attach to the bumper. I recommend
Amazon Customer –
rear bumper
Led –
Es una buen artículo, en. Calidad le doy un 9, el tiempo de entrega 10, funcionalidad 10, sólo hay que asegurarse bien del tamaño que necesitas.
Dorian –
Simple to apply and it has a great adhesion to the surface, importantly it is thick enough to absorb impact and sliding abrasion.
Gervais –
Le produit est très bien dommage lorsqu’il envoie dans la boîte il est plié sa lui fait un mauvais plis lorsqu’on le colle il pourrait le rouler à la place.
Chisandre –
quality of the product is 5 star but the problem is its does not fit the honda pilot 2023 as advertised.