Respirator Masks with 2091 Particulate Filter-Reusable Half Face Cowl Fuel Masks Used for epoxy resin asbestos woodworking spray paint masks Sawing Lead Paint Metallic Chopping and Different Work Safety
$2.00
Value: $2.00
(as of Mar 22, 2025 06:50:59 UTC – Particulars)
Particulars:
Meeting consists of Half Facepiece Respirator and Particulate Filter 2091 P100
Half facepiece design combines consolation and comfort
Remarkably comfy, tender, light-weight facepiece and easy-to-adjust head straps
6200 Half Facepiece Respirator Meeting consists of the Half Facepiece Respirator 6200 and P100 Particulate Filters 2091. Helps present respiratory safety in environments containing sure oil and non-oil primarily based particles.
This meeting features a 6000 Sequence Half Facepiece Reusable Respirator and two 2091 P100 Particulate Filters. This meeting for environments containing sure oil and non-oil primarily based particles. When correctly fitted, this respirator helps present safety in a wide range of functions together with welding, brazing, torch chopping, steel pouring, soldering, and publicity to steer asbestos, cadmium, arsenic, and MDA at concentrations as much as 10 instances the Permissible Publicity Restrict (PEL). This respirator is remarkably comfy, tender, and light-weight, and options easy-to-adjust head straps. The swept-back design of the cartridges helps enhance steadiness and visibility. Simple-to-adjust head straps enable for a personalized match to the person. When used to capability, the included cartridges will be eliminated and changed with new P100 Filter/Cartridges or 6000 Sequence Cartridges. The respirator can be disassembled, cleaned, and reused, extending the life and value effectiveness of the product.
Respiratory hazardous particles, gases and vapors will be dangerous to your well being. The half Facepiece Reusable Respirator 6000 Sequence helps cut back publicity to many contaminants. Enhanced consolation and visibility options make carrying the respirator noticeably extra pleasurable
Bundle Dimensions : 8.31 x 5.55 x 4.33 inches; 12.31 ounces
Merchandise mannequin quantity : 6200+2091-9in1
Division : Unisex Grownup
Date First Obtainable : Might 30, 2023
ASIN : B0C6MN8D7X
Nation of Origin : China
8 reviews for Respirator Masks with 2091 Particulate Filter-Reusable Half Face Cowl Fuel Masks Used for epoxy resin asbestos woodworking spray paint masks Sawing Lead Paint Metallic Chopping and Different Work Safety
Add a review
Related Products
$2.00
Scoobis –
It is much better then it seems
This respirator uses standard 2091 filters which you can get anywhere including your local big box stores. The mask has one-way valves so air only comes in through the filter but when you breathe out it goes through the center and not through the filter. the filter connects have a good seal. The facemask has vents to prevent fogging up.due to the design, it is easy to breathe with this mask, and the goggles do not fog up. it is very comfortable on the face and isn’t fatiguing. the straps for the mask and the goggles are adjustable for the best covert and fit. This is a higher-quality mask than you might expect from the listing.Filters change quickly with just a 1/6 of a turn and they pop off and on. it comes with 4 sets of filters to get you started.I give this mask a thumbs-up
Shauna –
Does what it’s supposed to
I use this when I pour resin and when I clean with bleach. I can still smell the chemicals but it prevents me from breathing them in directly and protects my lungs and my throat from irritation
NuiG –
Comfortable fit, good lung and eye protection
I use masks a lot these days for my epoxy projects and always wear a mask and eye protection. I also use this for painting and other similar work. The fit is comfortable and I like the replaceable filters. 2091 filters are easy to find so no issue there.
J. Wilson –
Average mask for homeowner use.
This is a basic respirator for the homeowner. The mask is plastic and has two straps to hold the mask on your head, one for the lower part and one for the upper back of your head but it isn’t the most comfortable fit. The mask covers the eyes really well, almost like a swim mask. It comes with 8 filters that you twist onto the vents. The mask functions well in that it allows you to breathe in through the filters only and then breathe out easily. This is a basic mask and far from a professional mask. I use it in my pottery studio to protect myself from airborne chemical powders and dust.
JP Folkes –
Mask Works Okay With Both Straps On
If you have a larger head/face, this is not going to work for you. I think I have about an average sized face and it feels a bit small to me when trying to fit it over my nose and mouth. Second, you need to use both straps to get any kind of a good seal on your face. If you don’t, you might as well not bother putting it on in the first place. Third, if you are going to be using this while sanding something or doing some sawing or wood work then I think it will be okay. However it does say it’s good for when working with epoxy and other toxic fumes and this I don’t agree with. Filters included will stop certain particulates…larger bits that come from sanding wood or metal, or from cutting/sawing wood and metal, but not from vapor contaminants.I opened up a can of epoxy cement and put the mask on and could still smell the fumes quite strongly and at a distance with the mask on. When I took the mask off…the fumes were about the same. I wouldn’t trust this on vaporous hazards.If you are average sized or smaller, the mask should be fine and if you are working with wood or metal project…it should work for you. However, if you are working with paints, epoxies, glues or other vapor issues, I would look for another protective mask. Product is well made, but not all it’s advertised to be.
Jose Campillo –
Fine mask with 2091 filter compatibility, but terrible eye cover.
Working with resins, sanding, and painting you should definitely have a mask on hand. Filters come cheap and generally have a degree of compatibility.This mask works fine, I can’t tell you with 100% certainty since I don’t have the machines to test that, but between what I find left on the filter and not in my nose this is most likely good enough for 2091 p100 filter levels.The eye mask however should not be considered. Out of the small box it came in the goggles are bent far out of shape. If they were normal I would still advise against them as they don’t seal and I don’t see any safety rating on them to indicate durability.
Carpenter –
Comfortable as well as practical
The mask fits comfortably and conforms to your facial features. I washed it in some warm soapy water and then attached the filters. The filters lock in counter clock wise. I didn’t feel like I was struggling to breathe once the filters were set in place. The one thing that concerns me is the latch used on the lower strap that goes behind the neck area. It’s plastic and not very durable.
Claire –
Fit is not bad but could be improved
This mask is pretty comfortable until I had to put the lower strap on, I know it’s supposed to be tighter but the strap needs to be longer. The upper head strap does fit well though. The glasses are comfortable and clear to see through (ive found some safety glasses are a little foggy) Love the pink pads too, sometimes I need a touch of femininity while im sweaty and covered in dust or paint lol. Overall pretty good product just a little room for improvement.