Telephone Mount for Automobile Telephone Holder Gravity Telephone Holder Automobile Mount for iPhone Air Vent Clip Cell Telephone Holder Mount Cradle Match Smartphone
$6.99
Worth: $6.99
(as of Mar 17, 2025 19:36:36 UTC – Particulars)
From the model
Make Your Journey Simpler
Your Greatest Assistant
CINDRO was established in 2017, Shenzhen. Now we have an impartial R&D base, forming an auto elements manufacturing and meeting line integrating R&D, manufacturing and gross sales.
Mixed with market adjustments and person wants, we proceed to enhance automotive elements: automotive cellphone holder, simply to present automotive lovers a safer driving expertise.
Automobile Telephone Holder
Improve Metallic Hook
The fabric of the Telephone Automobile Mount hook is hard steel, making certain that the automotive mount hook clip won’t break.
By no means Fall Off
CINDRO cellphone mount will provide a safe grip in your cellphone to make sure safer driving and shield your cellphone from dropping and scratching.
360° Rotation
The common cellphone mount is adjustable 360 levels, permitting you to take pleasure in the very best view whereas driving safely
Gravity Automobile cellphone mount
Gravity Automobile cellphone mount with folding again construction by no means blocks the vent and stays small when not in use, just one/2 card measurement.
Easiest Operation: Mobile phone holder automotive robotically locks your cellphone by gravity, simply slide it in. Extendable bottom gives robust, steady assist to forestall it from falling off whereas driving.
Compact Design: Gravity Automobile cellphone mount with folding again construction by no means blocks the vent and stays small when not in use, just one/2 card measurement. 3 inches from the vent, nonetheless permits airflow. Notice: Horizontal mode shouldn’t be supported.
Upgraded Metallic Hook Clip: Telephone holder for automotive hook options built-in chrome steel steel, wrapped in a thick layer of plastic outdoors. Whereas firmly locking the air vent blades, ensures that no scratches are left behind. Notice: Spherical vents aren’t suitable.
Huge Compatibility: Automobile cellphone mount is appropriate for all 4.0-7.0 inch with thickness ≤ 18 mm smartphones. Additionally appropriate for many vehicles, pickup vans, SUVs, sedans, and cabs, making it a great assistant for drivers.
Quiet Driving Surroundings: Mobile phone automotive mount is designed with a noiseless design that works by gravity-driven springs to carry your cellphone firmly. Eradicating the standard gear construction and buttons gives you with a quiet driving atmosphere even on bumpy roads.
Carefree After-sales Service: You probably have any questions on receiving our merchandise, please contact us at any time. It’s our pursuit to supply high-quality merchandise for our clients and make them happy. We’ll do our greatest to give you passable options.
Clients say
Clients discover the transportable digital gadget mount useful and sensible. It securely holds their telephones in place, utilizing gravity to maintain them in place. The construct high quality is praised as sturdy and well-built, with no falls off or damaged elements. Set up is straightforward and simple, and it is simple to load and take away the cellphone. Clients are additionally happy with the design and worth for cash. Nevertheless, some have differing opinions on how effectively it matches in sure automobiles.
8 reviews for Telephone Mount for Automobile Telephone Holder Gravity Telephone Holder Automobile Mount for iPhone Air Vent Clip Cell Telephone Holder Mount Cradle Match Smartphone
Add a review
Related Products
![Common Automotive Cellphone Holder Mount,360 Levels Rotation Dashboard Cellphone Holder [Upgrade Clip Never Fall],automotive Cellphone Mount for iPhone,Samsung,Google,Nokia,and 4 to 7″ Smartphones](https://i0.wp.com/m.media-amazon.com/images/I/61r0UWAWY9L._AC_SL1123_.jpg?w=300&resize=300,300&ssl=1)
$6.99
E. E. Mort –
Pretty good really – zero issues
It does vertical only (like all the others – just makes me sad). Easy to install and very sturdy. Articulates well and holds it’s orientation – and the rubber bumpers on the holder (which others’ often down have) are a nice plus. Couldn’t be happier. One note – there are a couple of holders that have an arm connection to the base that means the actual phone holder is an inch or two lower than the actual vent connection base – this would have been nice… I find my phone is up a little too high – wish the top of my phone rested about where the connection point is – rather than the base being at that height. Since the holder doesn’t sink down when the phone is placed in it (it’s more of a phones weight makes the arms go up and close, rather than the bottom going down much, perhaps half an inch). With the phone up so high the vent is also blocked but it’s the field of view annoyance that bothers me. Again, this same holder on a two inch declining goose-neck type arm would be perfect – at least for me and for my car’s layout (VW) where the vents are quite high up on the center dash area…
Jason Lauderman –
Simple yet effective!
If you are searching for the perfect phone holder for your car then look no further! This is the best design I’ve seen in a while. Hooks right up to your cars vents and is secured tightly. Simply set your phone on it to lock into place with soft gripping pads. The unit is spring loaded so when you need to pick up your phone simply lift up and the device opens back up. I have purchased 3 of these! Anything less than 5 stars is unacceptable. Just buy one and thank me later. Note: I do believe this will not fit round vents as noted in pictures. Should fit most phones though.
Adele Eve –
Incredible, easy hold (once you figure it out)
The way this attaches to your vent fin is genius, and now that I have it all situated, it almost feels like it was factory installed. The installation is fiddly though, and you have to make sure everything is nice and tight and situated to get there. The arms grip a little too well, and it’s just a bit of a struggle trying to get the phone OUT of the holder. With the case I have, the thing can be upside down and it still holds on tight, which is almost annoying honestly. But I know it won’t ever accidentally fall out, and that’s what counts.
Codi –
Awesome.
Love this. Easy to install and adjust, very sturdy, perfect fit for my phone in its case.It did break after maybe 2 years, just the right side piece, but I still use it. Just have to be careful when I make left turns that I hold onto it LOL.I’d get it again.
islandlady –
Works well
So far this works well, although I have a pop socket on my phone and the prevents the holder from being as secure. Without the pop socket, it would fit very well. I found this to be easy to put together and install on my air vent in my jeep. I do knock it around quite a bit and so far it has not fallen off or broken. The only other downside is nothing to do with this holder, I am afraid of forgetting my phone in the car which would be a disaster considering what they cost these days.
Nicole L. –
Reliably holds phone, but release is too slow
I took this on a 2,300-mine road trip in a Ford Ranger on the gravel roads of Namibia. Consider it well-tested!The arms gripped the dual-layer case of my Google Pixel 6 Pro gently but firmly. Never once did my phone jiggle loose. The air vent hook was easy to install and worked great. I was able to tighten everything down the way I wanted it. One nice thing is that there was enough space between the vent and the back of the holder that it didn’t impede the airport.So why did I only give it three stars? One point against it was the arm length. My phone isn’t dainty, but it’s not that big, and there wasn’t that much room to spare. More importantly, though, is that it’s not easy to release the arms. The button is on the back and it’s awkward – you have to press the glass front of your phone to push the button. Worse, the arms slowly creep apart; a lot of times you have to help them open up while you’re already fumbling with the back button.I am thinking about buying a different phone holder that opens up more easily, but this one works well enough that I can get by just fine – I just wish I’d bought a different brand to begin with.The photos in this review are in my Toyota Highlander. You can see it fits well.
thanh –
Simple and perfect
Im not a fan of the suction holders and then came across this …no suctions, no bulky holder in the middle of the car window was my idea of a good phone holder. Its super easy to put together and does go in the air vent clip but you can adjust it to fit in the vent so i loved that for that extra security . Easily put your phone in and out and grips like a charm. I have an iphone 12 pro max so size doesnt matter and what i was worried about since the pro maxs are heavier and bigger but no complaints
RC –
Best phone mount I’ve ever bought!
I bought this over a year ago and use it everyday. My favorite thing about it is how quick and easy it is to put your phone in and take it out, all with one hand. I would buy it again and as a gift for anyone I know needs one.