10 AMP 12V Automobile Audio Radio Amplifier Noise Suppressor and Stereo Filter with Floor Loop Isolator
$17.99
Value: $17.99
(as of Mar 08, 2025 12:06:53 UTC – Particulars)
Utilization Methodology:
Open the sprint of your automobile.
Discover the constructive and unfavourable line of the cellular electronics and your automobile.
Splice the pink wire to the road of 12V enter.
Splice the blue wire to the constructive line of the cellular electronics.
Splice the black wire to the bottom wire of your automobile.
Tuck the automobile audio noise suppressor behind the sprint.
End it, the noise of your automobile audio, amplifier and different supply items will probably be eradicated.
Be aware:
Guarantee your automobile cellular electronics have floor wire.
Don’t go from the bottom terminal of 1 digital to the opposite one, and from there to floor.
When you’ve got two or over two automobile cellular electronics, you additionally set up two or over two automobile audio noise suppressors.
Specs:
Materials: Plastic & Steel
Present: 10A
Voltage: 12V
Package deal Dimension: 7.13 * 4.29 * 1.18 inches
Physique Dimension: 1.67 * 1.81 * 0.79 inches
Cable Size: 7.68 inches
Internet Weight: 1.27 ounce
Casing Shade: Black & Grey
Cable Shade: Black & Crimson & Blue
Package deal Embrace: 1 * Mr. Ho 10A Automobile Audio Noise Suppressor
Package deal Dimensions : 6.73 x 4.88 x 0.75 inches; 1.48 ounces
Merchandise mannequin quantity : Mr Ho
Date First Out there : November 25, 2019
Producer : Noise Filter-2
ASIN : B08213FMPN
ELIMINATING BUZZING NOISE : It may remove the engine noise of stereos and amps, the alternator noise, the noise of floor loop and the automobile engine noise. Preserve a transparent listening setting for you.
FULL FREQUENCY RESPONSE: automobile stereo to produces highly effective resonance and whereas filterinh {the electrical} interference coming from the speaker
EASY INSTALLATION: Connect the pink wire to 12v on the fuse field or battery then connect the blue wire to the ability wire of the radio the place the electrical energy goes. Lastly, floor the black wire to the automobile’s body or any accessible floor wire
SMALL SIZE：The physique measurement is 1.67 * 1.81 * 0.79 inches. It’s appropriate to put in behind your automobile accent socket. Save a number of house for the panel and maintain the electronics wires tidy.
SUITABLEELECTRONICS: It’s appropriate for automobile audio, radio, amplifier stereo receivers, equalizers, and different cellular electronics.
6 reviews for 10 AMP 12V Automobile Audio Radio Amplifier Noise Suppressor and Stereo Filter with Floor Loop Isolator
Add a review
Related Products
$17.99
Feral –
No More Audio Whine!
This suppressor worked perfectly. My car’s sound system no longer makes whining noises that originated from replacement coil packs. So much better!
Raymond Carnley –
Did not eliminate the hum…
Bought several to use for an audio installations that I do. They appeared to be very poorly made and were not the level of quality that I’ve gotten from other brands. Gave them a try and they didn’t work. I couldn’t even detect any decrease in the ground loop interference. Returned them all.
Kevin –
Stopped the hum
I don’t know how it works, it just did. No more noise issues all you here is the music
D. Hinkle –
Don’t waste your money.
Very cheaply made. Bottom cover was not even sealed down. Open cover because it wouldn’t close. Found circuit board doesn’t even fit into case. Save your money and buy better quality product.
Danny Eden {Kraka} –
Dont work.
I installed in my car as said, speakers sound the same as without it.
miguel valdez –
sucks
don’t work