KEMIMOTO UTV Flip Sign Equipment with Horn, Pre-Wired, Plug and Play UTV ATV Blinker with Rocker Change, Hazard Mild, Common Road Authorized Equipment Appropriate with Polaris, Can-Am, Kawasaki, CFMOTO
$69.99
Worth: $69.99
(as of Mar 08, 2025 00:00:17 UTC – Particulars)
From the model
KEMIMOTO UTV Flip Sign Equipment
KEMIMOTO UTV Flip Sign Equipment
KEMIMOTO SXS Mirrors
First Excessive-Finish Mirrors
Established in 2011, KEMIMOTO has expanded right into a thriving group of over 500 devoted people. As a passionate, persistent, and knowledgeable staff, our core worth stays enhancing the usability of equipment and elevating the journey expertise. Up to now, KEMIMOTO’s dedication to pioneering revolutionary accent options has helped over 1 million riders fulfill their dream driving journeys.
Appropriate with RZR XP 1000
KEMIMOTO UTV Equipment
KEMIMOTO UTV Solar Visor
Appropriate with RZR XP 1000
Common Compatibility: Our street-legal flip sign package is designed to suit a variety of automobiles; it’s appropriate with Polaris RZR Ranger, Pioneer, Talon, Can-Am X3, Kawasaki Teryx Mule, Arctic Cat, CFMOTO, Golf Cart, LandMaster, Segway, and extra. With our package, you may simply make your car street-legal and enhance security on the highway
Plug and Play/Simple Set up: KEMIMOTO UTV street-legal package includes a plug and play design. The pre-assembled harness and labeled mild connector positions make set up fast and straightforward. Our side-by-side flip sign mild package is ideal for 2-seater, 4-seater, and 6-seater automobiles
110DB Horn: The KEMIMOTO UTV flip sign package features a 110DB horn that alerts close by automobiles and pedestrians with out alarming them out of the blue. You should utilize quick or lengthy presses to activate the horn, and it’ll cease as quickly as you launch the button. The electrical horn package comes with an identical versatile swap; press to sound and launch to cease, with a laser-etched LED swap that makes it simple to make use of even in the dead of night
Amber Mild: Higher Visibility in All Climate Situations. The UTV blinker package consists of amber turning indicators, that are essentially the most penetrating mild within the spectrum. They are often seen from an extended distance, even in wet and foggy climate. These lights make it simpler for automobiles behind you to note your car and create vigilance, thus enhancing security consciousness
Upgraded Wire Harness Size: The KEMIMOTO flip sign package comes with an upgraded wire harness size that may accommodate automobiles as much as 220 inches lengthy. Colour traces are marked on the corresponding set up location, making set up extra environment friendly. The package consists of all crucial equipment, together with amber turning sign lights x4, 110db horn x1, left/proper rocker swap x1, hazard, horn swap x1, harness set x1, relay x1, nylon cable ties set x1, and an set up information x1
Clients say
Clients discover the car mild meeting simple to put in with little drilling required. They are saying it really works nicely and comes with the whole lot wanted to operate correctly. Many think about it an excellent worth for the worth, with vibrant LED lights that make their automobiles seen. The horn quantity is loud sufficient for many clients. The package high quality and construct high quality are additionally appreciated. Nonetheless, opinions differ on the horn mild.
Related Products
$69.99
Mbramms –
Amazing!
Great value and hardware is quality. Everything was simple, quick connects and mounting was easy. Bright lights for turn signals and horn is loud! Everything worked as it should!
Crispy –
Easy installation
This turn signal kit had me street legal in no time, horn was loud and the led lights are very bright another great product from kemimoto
chad b. –
Cost effective
Universal kit that installed easily. Had an issue installing the switch as no measurements were given. Works nicely.
Matthew –
Excellent item for the price. Love the brand, Kemimoto
Second item I have purchased thru Kemimoto for my UTV. This was perfect. Everything prewired and plenty of wire to get everywhere tucked away in my Gator RSX850. The only complaint I have is the Right and Left appear to be mislabeled. Someone else said the same thing but I figured they wired it wrong. I would assume Right is the passenger and left is the driver, but its NOT. I just flipped the left and right turn signal switch upside down and solved the problem but I will save you a step. Right = Driver, Left = Passenger side.Super bright lights, horn is perfect sound level. Switches clip in nice and tight and plenty of wire and wire is even sleeved with protection where needed. 5/5 would recommend again!
Larkin –
Good Price works well
Worked very well on my 2024 Polaris Ranger 1000. I bought some pulse plugs to plug into my Polaris electric system’s Pulse buss bar from a different company on a separate order, which were 3 each for about $10. The other 2 plugs would serve as spares for adding future accessories. These plugs have 3 wires, a black negative, a red positive that stays on continuously, and a blue positive that is wired to the ignition switch. I wired the turn signal kit’s red wire it to my pulse plug buss bar using the blue wire which is on the ignition switch instead of using the red wire on the plug which supplies continuous 12volt power like it would be if I had a direct wiring to the battery. I did this because when the wiring kit is powered, there is a light on the horn switch that stays illuminated. I wanted it to turn on & off with the ignition switch. I did not want it to stay on continuously and possibly be a drain on the battery. I also wired kit’s red positive and black negative to the pulse bar plug using male/female wire connectors allowing me to change the turn signal kit’s positive from the pulse plug ignition switch’s blue wire to the pulse plug’s red wire in the event that I needed to leave my Polaris parked with the warning flashers on and the ignition key removed from the vehicle.Mounted the front turn signal lights into the front grill as opposed to drilling holes into my Polaris just as a test. I will leave as is until I feel I have a need to move to a more visible area. I wrapped about a 3 inch long piece of 1/2” wide house door weather insulation strip around each front light and just inserted them onto the existing holes of the front grill. Then put a wire tie on the light wires to further secure them to the metal straps above the radiator that mounts the front grill. I have driven over 20 miles at high speeds with the front lights mounted in the grill with no problems.See attached pictures of Polaris Electric Pulse Buss Bar and it’s Plug to the wire kit harness, the grill mounted front lights, and the back turn signal lights on and showing lights NOT so visible in the direct sunlight.
Dave witters –
This kit can adapt to any brand of side by side/ UTV out on the market
Everything was easy to hook up. Lights are bright. The horn is the same 110db horn that’s in most vehicles. Very little drilling required. Comes at very good price for what all comes with it.
Patrick Moore –
Not Truely Universal
Purchased this light kit for my 2023 Can Am Defender (3 seat configuration) and having to return it. Short answer is that the wires are not long enough to fit this unit. Absolutely do not buy this kit if you have the extended (6 seat) version.My first disappointment was the instructions. The paper instructions included with the box are only a few pictures with no actual instructions. Even the video here on Amazon only shows a partial list of items to install. Kemimoto’s web site doesn’t even provide instructions. I was able to find others (on YouTube) and figured I could overcome their lack of instructions. I.E. the video says to drill holes for the lights. NO WHERE do they say what size hole you should drill. You’ll have to guess. I test drilled into some plastic with my step drill bit to determine the right size.I tried several locations for the modules/connectors, but there were no configurations that allows all the wires to reach their location/destination. If I put the connector under the dash, the wire for the drivers side rear turn signal would not reach. I checked and the two left wires are the same length. If I put the connector near the bottom of the dash (closer to the floor to get more wire for the turn signal) the wire to the horn is not long enough. If I put the horn near the battery box (under passenger, the wire from control module will not allow the rocker switches to be installed. The pictures/videos on the Amazon page shows the kit installed on a Can-Am Defender, but they must have shortened the wires in later versions because mine would not work. I guess I could have spliced in more wire, but the solution I bought or should be needed for a “universal” kit. Maybe they should have included some extensions or another 4-6 feet of wire for the rear signals.
Gary –
Works Great !
Worked great ! Nicely packaged and good quality.
Alejandro f. –
Llego fundido un foco, lo note hasta que instaleEl producto.
Greg G. –
Easy Install worked great the only thing I did was remove the spring in the flasher rocker so it would not be lite up all the time and drain my battery take special care when opening up don’t break off the tabs overall very satisfied all plug and play drill hole pop in place screw together.
joel roberge –
aime bien se produit
Eric B. –
Une fois connecté les 4 clignotants clignote toujours ? Pourquoi !?Merci